Customer Project

Remove Set in Grease Stains from your Deck

Browse Projects

  • Refresh your concrete front porch

  • RockSolid 6x Deck

    Outdoor Decking DIY Project

Deck cleaned of all dirt Afterwards

  • Estimated Time

    2 Hours

  • Challenge Level

    Easy

  • Tools & Supplies:

    • Hose or Pressure Washer

    • Bucket with H2o

    • Scrub Castor

For spot cleaning:

  1. Spray expanse to be cleaned with h2o. Always maintain a moisture surface on area being cleaned.
    note: For all-time results this project should be completed out of straight sunlight. Do not let the product dry on the surface.
  2. Spray Original Krud Kutter directly onto the stains.
  3. Allow to penetrate the surface for 1 – ii minutes.
  4. Agitate stained area with a scrub castor.
  5. Rinse well with h2o.
  6. Depending on how long the stain has been at that place a second application may be needed.

For general, over all cleaning using pressure level washer:

  1. Rinse surrounding areas and vegetation with water.
  2. Rinse area to be cleaned with water. Do not let the product dry on the surface.
    note: For all-time results this project should be completed out of straight sunlight. It's likewise best to work small sections.
  3. Put siphon tube of the pressure washer directly into the bottle of Original Krud Kutter or pour product total force into reservoir of the pressure washer.
  4. Spray at a depression pressure onto the wet surface.
  5. Allow sit for 3-5 minutes – do not allow the production to dry on the surface.
  6. Heavily soiled or mildewed areas may demand to exist scrubbed or a second application may be necessary.
  7. Repeat for all sections of your deck.
  8. Rinse surrounding vegetation again.

For general, cleaning with a hose:

  1. Mix 12 oz of production with 1 gallon of water in a bucket. note: If heavily soiled it may be necessary to make the mixture slightly stronger with Original Krud Kutter.
  2. Rinse surrounding areas and vegetation with h2o.
  3. Moisture a section of the deck to be cleaned. Do not let the product dry on the surface.
    note: For best results this project should be completed out of direct sunlight. It'south also best to work in sections.
  4. Clean in sections with a soft bristle brush.
  5. Let sit for 3-5 minutes – do not allow the product to dry out on the surface.
  6. Rinse cleaner off the surface with a hose.
  7. Heavily soiled areas may demand a 2d application.
  8. Echo for all sections of the deck.
  9. Rinse surrounding vegetation.