How To Assemble Shark Rocket Duo Clean Upright Vaccum

Shark Rocket

DuoClean^® with Self-Cleaning Brushroll Corded Stick Vac

QUICK Outset GUIDE

WHAT'Southward INSIDE

ASSEMBLY

VERSATILE Floor-TO-CEILING CLEANING

Settings

Slide switch to the lesser to plow off ability. To brainstorm vacuuming, slide switch to the appropriate setting.

Bare Floor/Pocket-sized Surface area Rugs

The brushrolls spin slowly to clean bare floors and delicate expanse rugs.

Carpeting

The brushrolls spin faster to pick upwardly debris below the surface of your carpets.

NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use Setting Two, Carpet.

NOTE: Select Carpet for stuck-on dust and debris.

Upright Way

To make clean floors, identify foot on floor nozzle and tilt handheld vacuum back.

Above-Flooring with Wand

Stand the vacuum upright. Pace on the foot pedal on the flooring nozzle and pull the wand up to disconnect it. Great for cleaning baseboards, ceiling fans, window sills, etc.

Press the WAND RELEASE push button and lift the handheld vacuum off the wand. Great for cleaning stairs and furniture.

Note: All accessories are compatible with both the wand and the handheld vacuum. Use Setting I for all above-floor accessories.

STORAGE

Onboard Hook

Hang the handheld vacuum on the hook on the bottom of the wand, and wrap the ability string around the cord hooks.

NOTE: Wrap the power cord around the summit hook showtime, leaving a picayune slack.

DUST Loving cup

Empty dust loving cup every time droppings reaches the MAX fill up line.

To remove the dust cup from the handheld vacuum, squeeze the two Dust Cup Release buttons at the aforementioned fourth dimension and pull out the dust cup. Property the dust cup over a trash bin, press the Empty push on the front end of the grit cup.

With the grit cup fastened to the handheld vacuum, concord the dust loving cup over a trash bin and press the Empty button on the front of the dust cup.

MAINTENANCE

Brushroll/Soft Roller Admission

To open the brushroll garage, slide both release buttons on the flooring nozzle abroad from you, toward the back of the nozzle, and then lift off the lid.
To close the brushroll garage, insert the 3 tabs on top of lid into the three slots in the nozzle, then push down on both sides of lid until information technology clicks securely into place. If Brushroll Indicator Light is green and headlights are flashing, check once more that both sides of hat are locked in place.

Brushroll Maintenance

With the garage chapeau removed, carefully clear away whatsoever debris that may be impeding the brushroll.

NOTE: If you see any hair wrapped around the brushroll, keep cleaning, using Setting II, Rug, on bare floors. This will allow the self-cleaning brushroll to remove the pilus wrap and send it to the grit cup.

Cleaning the Soft Roller

Open the brushroll garage. Lift out the Soft Roller by pulling the tab on the correct side. Clear abroad whatever droppings, and so slide the Soft Roller dorsum into place.